Marathon
Marathon 1020FDL1102
MagnaPOWER series
2,300 kVA nominal prime @ 50 Hz
Marathon 1020FDL1102 generator-set use
The Marathon 1020FDL1102 is a generator alternator used to convert engine shaft power into electrical output for diesel and gas generator sets. This page summarizes the searchable model identity, nominal output, pole count, family, and data-sheet link so buyers can match the alternator with an engine, voltage, controller, enclosure, and duty rating.
For quick sizing, this database lists the 1020FDL1102 at 2,300 kVA nominal prime output at 50 Hz. Confirm voltage, winding, temperature rise, and overload capability on the manufacturer data sheet.
Also searched as
Specifications
| Brand | Marathon |
| Model | 1020FDL1102 |
| Series | MagnaPOWER |
| Poles | 4-pole |
| Nominal Prime Output | 2,300 kVA @ 50 Hz |
Full ratings across every voltage, frequency and winding are published on the manufacturer’s data sheet.
Frequently asked questions
What is the Marathon 1020FDL1102 used for?
The Marathon 1020FDL1102 is used as a generator alternator in engine-driven generator sets, converting mechanical shaft power into electrical output for standby, prime, or continuous-duty packages.
What kVA rating is listed for the 1020FDL1102?
This database lists the 1020FDL1102 at 2,300 kVA nominal prime output at 50 Hz. Final sizing should confirm voltage, winding, temperature rise, and duty rating from the official data sheet.
Can Haifeng Machinery package this alternator with an engine?
Yes. Haifeng Machinery can help match alternators such as the Marathon 1020FDL1102 with a diesel or gas engine, controller, enclosure, voltage configuration, and compliance requirements for a complete generator package.
Technical Data Sheet
Official Marathon data sheets for the MagnaPOWER range — all windings, voltages and frequencies.
View Data Sheets ↗Need this alternator?
Haifeng Machinery can match this alternator with an engine, controller, enclosure, voltage, and duty rating for a complete generator package.
Get a Quote ↗Generator package paths