Cummins KTAA19-G5 vs SDEC SC27G755D2
Compare Cummins KTAA19-G5 and SDEC SC27G755D2 by recorded output, operating duty, frequency and engine specifications. Their listed displacements are 19 L and 27 L, respectively. Start with the same duty and frequency, then check each model’s source and package conditions. These records alone do not establish interchangeability.
| Specification | Cummins KTAA19-G5 | SDEC SC27G755D2 |
|---|---|---|
| Standby electrical (50 Hz) | 505 kWe | 504 kWe |
| Prime electrical (50 Hz) | 420 kWe | 455 kWe |
| Standby electrical (60 Hz) | 550 kWe | Not listed |
| Prime electrical (60 Hz) | 470 kWe | Not listed |
| Displacement | 19 L | 27 L |
| Configuration | L6 | L6 |
| Cylinders | 6 | 6 |
| Recorded engine speed | 1,500 RPM | 1,500 RPM |
| Fuel | Diesel | Diesel |
| Cooling | Liquid-Cooled | Liquid-Cooled |
| Recorded emissions classification | Unregulated | China National Stage II / Unregulated |
| Dry weight | Not listed | Not listed |
| Origin | China | China |
Compare matching ratings
Read across a row to compare the same operating duty and frequency. kWe is electrical output; mechanical kW is power at the engine shaft. kVA is apparent electrical power and is shown only when kWe is missing, without converting it. “Not listed” means the record lacks that rating, not zero output. Continuous and prime duties are kept separate. Check source documents, units and site conditions before comparing values.
An emissions classification in the catalog is not proof of certification for your engine or installation. Confirm the exact model, applicable documents and generator configuration.
Cummins KTAA19-G5: Review the model record and available supporting documents
SDEC SC27G755D2: Review the model record and available supporting documents
Choosing between Cummins KTAA19-G5 and SDEC SC27G755D2
Use this comparison as an engineering shortlist, then confirm the complete generator package against load profile, voltage, 50/60 Hz frequency, duty class, emissions rules, cooling margin, altitude, ambient temperature, enclosure design, controller features, and alternator sizing.