Cummins QSM11-G1 vs Deutz TCD2013L6
Compare Cummins QSM11-G1 and Deutz TCD2013L6 by recorded output, operating duty, frequency and engine specifications. Their listed displacements are 10.8 L and 7.15 L, respectively. Start with the same duty and frequency, then check each model’s source and package conditions. These records alone do not establish interchangeability.
| Specification | Cummins QSM11-G1 | Deutz TCD2013L6 |
|---|---|---|
| Standby electrical (50 Hz) | 240 kWe | 240 kWe |
| Prime electrical (50 Hz) | 210 kWe | 216 kWe |
| Standby electrical (60 Hz) | 280 kWe | 276 kWe |
| Prime electrical (60 Hz) | 250 kWe | 248.4 kWe |
| Displacement | 10.8 L | 7.15 L |
| Configuration | L6 | L6 |
| Cylinders | 6 | 6 |
| Recorded engine speed | 1,500 RPM | 1,500 RPM |
| Fuel | Diesel | Diesel |
| Cooling | Liquid-Cooled | Liquid-Cooled |
| Recorded emissions classification | China National Stage III / Unregulated | Euro Stage IIIA |
| Dry weight | Not listed | Not listed |
| Origin | China | Germany |
Compare matching ratings
Read across a row to compare the same operating duty and frequency. kWe is electrical output; mechanical kW is power at the engine shaft. kVA is apparent electrical power and is shown only when kWe is missing, without converting it. “Not listed” means the record lacks that rating, not zero output. Continuous and prime duties are kept separate. Check source documents, units and site conditions before comparing values.
An emissions classification in the catalog is not proof of certification for your engine or installation. Confirm the exact model, applicable documents and generator configuration.
Cummins QSM11-G1: Review the model record and available supporting documents
Deutz TCD2013L6: Review the model record and available supporting documents
Choosing between Cummins QSM11-G1 and Deutz TCD2013L6
Use this comparison as an engineering shortlist, then confirm the complete generator package against load profile, voltage, 50/60 Hz frequency, duty class, emissions rules, cooling margin, altitude, ambient temperature, enclosure design, controller features, and alternator sizing.