Haifeng Machinery

Googol PTAA8L-EG625 vs Lister Petter LP617EG1

Compare Googol PTAA8L-EG625 and Lister Petter LP617EG1 by recorded output, operating duty, frequency and engine specifications. Their listed displacements are 19 L and 16.7 L, respectively. Start with the same duty and frequency, then check each model’s source and package conditions. These records alone do not establish interchangeability.

SpecificationGoogol PTAA8L-EG625Lister Petter LP617EG1
Standby electrical (50 Hz)550 kWe550 kWe
Prime electrical (50 Hz)500 kWe500 kWe
Standby electrical (60 Hz)Not listedNot listed
Prime electrical (60 Hz)Not listedNot listed
Other recorded mechanical power (duty unspecified)Not listed600 kW
Displacement19 L16.7 L
ConfigurationL8L6
Cylinders86
Recorded engine speed1,500 RPM1,500 RPM
FuelDieselDiesel
CoolingAir-AirLiquid-Cooled
Recorded emissions classificationChina National Stage III / UnregulatedEuro Stage III
Dry weightNot listedNot listed
OriginChinaUnited Kingdom

Compare matching ratings

Read across a row to compare the same operating duty and frequency. kWe is electrical output; mechanical kW is power at the engine shaft. kVA is apparent electrical power and is shown only when kWe is missing, without converting it. “Not listed” means the record lacks that rating, not zero output. Continuous and prime duties are kept separate. Check source documents, units and site conditions before comparing values.

An emissions classification in the catalog is not proof of certification for your engine or installation. Confirm the exact model, applicable documents and generator configuration.

Googol PTAA8L-EG625: Review the model record and available supporting documents

Lister Petter LP617EG1: Review the model record and available supporting documents

Choosing between Googol PTAA8L-EG625 and Lister Petter LP617EG1

Use this comparison as an engineering shortlist, then confirm the complete generator package against load profile, voltage, 50/60 Hz frequency, duty class, emissions rules, cooling margin, altitude, ambient temperature, enclosure design, controller features, and alternator sizing.