Hyundai DP126LB vs SDEC SC13E500D2
Compare Hyundai DP126LB and SDEC SC13E500D2 by recorded output, operating duty, frequency and engine specifications. Their listed displacements are 11.1 L and 13 L, respectively. Start with the same duty and frequency, then check each model’s source and package conditions. These records alone do not establish interchangeability.
| Specification | Hyundai DP126LB | SDEC SC13E500D2 |
|---|---|---|
| Standby electrical (50 Hz) | 334 kWe | 336 kWe |
| Prime electrical (50 Hz) | 301 kWe | 305 kWe |
| Standby electrical (60 Hz) | 368 kWe | Not listed |
| Prime electrical (60 Hz) | 334 kWe | Not listed |
| Displacement | 11.1 L | 13 L |
| Configuration | L6 | L6 |
| Cylinders | 6 | 6 |
| Recorded engine speed | 1,500 RPM | 1,500 RPM |
| Fuel | Diesel | Diesel |
| Cooling | Liquid-Cooled | Liquid-Cooled |
| Recorded emissions classification | Unregulated | China National Stage II / Unregulated |
| Dry weight | Not listed | Not listed |
| Origin | South Korea | China |
Compare matching ratings
Read across a row to compare the same operating duty and frequency. kWe is electrical output; mechanical kW is power at the engine shaft. kVA is apparent electrical power and is shown only when kWe is missing, without converting it. “Not listed” means the record lacks that rating, not zero output. Continuous and prime duties are kept separate. Check source documents, units and site conditions before comparing values.
An emissions classification in the catalog is not proof of certification for your engine or installation. Confirm the exact model, applicable documents and generator configuration.
Hyundai DP126LB: Review the model record and available supporting documents
SDEC SC13E500D2: Review the model record and available supporting documents
Choosing between Hyundai DP126LB and SDEC SC13E500D2
Use this comparison as an engineering shortlist, then confirm the complete generator package against load profile, voltage, 50/60 Hz frequency, duty class, emissions rules, cooling margin, altitude, ambient temperature, enclosure design, controller features, and alternator sizing.