Haifeng Machinery

Lister Petter LP625EG10 vs SDEC 6KTAA25-G321

Compare Lister Petter LP625EG10 and SDEC 6KTAA25-G321 by recorded output, operating duty, frequency and engine specifications. Their listed displacements are 25.18 L and 25 L, respectively. Start with the same duty and frequency, then check each model’s source and package conditions. These records alone do not establish interchangeability.

SpecificationLister Petter LP625EG10SDEC 6KTAA25-G321
Standby electrical (50 Hz)876 kWe873 kWe
Prime electrical (50 Hz)800 kWe792 kWe
Standby electrical (60 Hz)Not listedNot listed
Prime electrical (60 Hz)Not listedNot listed
Other recorded mechanical power (duty unspecified)933 kWNot listed
Displacement25.18 L25 L
ConfigurationL6L6
Cylinders66
Recorded engine speed1,500 RPM1,500 RPM
FuelDieselDiesel
CoolingLiquid-CooledLiquid-Cooled
Recorded emissions classificationEuro Stage IIIChina National Stage III / Unregulated
Dry weightNot listedNot listed
OriginUnited KingdomChina

Compare matching ratings

Read across a row to compare the same operating duty and frequency. kWe is electrical output; mechanical kW is power at the engine shaft. kVA is apparent electrical power and is shown only when kWe is missing, without converting it. “Not listed” means the record lacks that rating, not zero output. Continuous and prime duties are kept separate. Check source documents, units and site conditions before comparing values.

An emissions classification in the catalog is not proof of certification for your engine or installation. Confirm the exact model, applicable documents and generator configuration.

Lister Petter LP625EG10: Review the model record and available supporting documents

SDEC 6KTAA25-G321: Review the model record and available supporting documents

Choosing between Lister Petter LP625EG10 and SDEC 6KTAA25-G321

Use this comparison as an engineering shortlist, then confirm the complete generator package against load profile, voltage, 50/60 Hz frequency, duty class, emissions rules, cooling margin, altitude, ambient temperature, enclosure design, controller features, and alternator sizing.