Haifeng Machinery

Lister Petter LP689EG2 vs Volvo Penta TAD883VE

Compare Lister Petter LP689EG2 and Volvo Penta TAD883VE by recorded output, operating duty, frequency and engine specifications. Their listed displacements are 8.9 L and 7.7 L, respectively. Start with the same duty and frequency, then check each model’s source and package conditions. These records alone do not establish interchangeability.

SpecificationLister Petter LP689EG2Volvo Penta TAD883VE
Standby electrical (50 Hz)196 kWeNot listed
Prime electrical (50 Hz)180 kWeNot listed
Standby electrical (60 Hz)220 kWe198 kWe
Prime electrical (60 Hz)200 kWe181 kWe
Other recorded mechanical power (duty unspecified)222 kW216 kW
Displacement8.9 L7.7 L
ConfigurationL6L6
Cylinders66
Recorded engine speed1,500 RPM1,800 RPM
FuelDieselDiesel/HVO
CoolingLiquid-CooledLiquid-Cooled
Recorded emissions classificationEuro Stage IIIU.S. EPA Final Tier 4
Dry weightNot listedNot listed
OriginUnited KingdomSweden

Compare matching ratings

Read across a row to compare the same operating duty and frequency. kWe is electrical output; mechanical kW is power at the engine shaft. kVA is apparent electrical power and is shown only when kWe is missing, without converting it. “Not listed” means the record lacks that rating, not zero output. Continuous and prime duties are kept separate. Check source documents, units and site conditions before comparing values.

An emissions classification in the catalog is not proof of certification for your engine or installation. Confirm the exact model, applicable documents and generator configuration.

Lister Petter LP689EG2: Review the model record and available supporting documents

Volvo Penta TAD883VE: Review the model record and available supporting documents

Choosing between Lister Petter LP689EG2 and Volvo Penta TAD883VE

Use this comparison as an engineering shortlist, then confirm the complete generator package against load profile, voltage, 50/60 Hz frequency, duty class, emissions rules, cooling margin, altitude, ambient temperature, enclosure design, controller features, and alternator sizing.