Haifeng Machinery

Lister Petter LP689G2 vs Yunnei D6R330-35CR

Compare Lister Petter LP689G2 and Yunnei D6R330-35CR by recorded output, operating duty, frequency and engine specifications. Their listed displacements are 8.9 L and 6.7 L, respectively. Start with the same duty and frequency, then check each model’s source and package conditions. These records alone do not establish interchangeability.

SpecificationLister Petter LP689G2Yunnei D6R330-35CR
Standby electrical (50 Hz)198 kWeNot listed
Prime electrical (50 Hz)180 kWe198 kWe
Standby electrical (60 Hz)220 kWeNot listed
Prime electrical (60 Hz)200 kWeNot listed
Other recorded mechanical power (duty unspecified)222 kWNot listed
Displacement8.9 L6.7 L
ConfigurationL6L6
Cylinders66
Recorded engine speed1,500 RPM1,500 RPM
FuelDieselDiesel
CoolingLiquid-CooledLiquid-Cooled
Recorded emissions classificationEuro Stage IIChina National Stage III / Unregulated
Dry weightNot listedNot listed
OriginUnited KingdomChina

Compare matching ratings

Read across a row to compare the same operating duty and frequency. kWe is electrical output; mechanical kW is power at the engine shaft. kVA is apparent electrical power and is shown only when kWe is missing, without converting it. “Not listed” means the record lacks that rating, not zero output. Continuous and prime duties are kept separate. Check source documents, units and site conditions before comparing values.

An emissions classification in the catalog is not proof of certification for your engine or installation. Confirm the exact model, applicable documents and generator configuration.

Lister Petter LP689G2: Review the model record and available supporting documents

Yunnei D6R330-35CR: Review the model record and available supporting documents

Choosing between Lister Petter LP689G2 and Yunnei D6R330-35CR

Use this comparison as an engineering shortlist, then confirm the complete generator package against load profile, voltage, 50/60 Hz frequency, duty class, emissions rules, cooling margin, altitude, ambient temperature, enclosure design, controller features, and alternator sizing.