Haifeng Machinery

Volvo Penta TAD1385VE vs Weichai WP13D385E200

Compare Volvo Penta TAD1385VE and Weichai WP13D385E200 by recorded output, operating duty, frequency and engine specifications. Their listed displacements are 12.8 L and 13 L, respectively. Start with the same duty and frequency, then check each model’s source and package conditions. These records alone do not establish interchangeability.

SpecificationVolvo Penta TAD1385VEWeichai WP13D385E200
Standby electrical (50 Hz)347 kWe346 kWe
Prime electrical (50 Hz)315 kWe315 kWe
Standby electrical (60 Hz)343 kWe346 kWe
Prime electrical (60 Hz)310 kWe315 kWe
Other recorded mechanical power (duty unspecified)373 kWNot listed
Displacement12.8 L13 L
ConfigurationL6L6
Cylinders66
Recorded engine speed1,500 RPM1,500 RPM
FuelDiesel/HVODiesel
CoolingLiquid-CooledLiquid-Cooled
Recorded emissions classificationU.S. EPA Final Tier 4China National Stage II / Unregulated
Dry weightNot listedNot listed
OriginSwedenChina

Compare matching ratings

Read across a row to compare the same operating duty and frequency. kWe is electrical output; mechanical kW is power at the engine shaft. kVA is apparent electrical power and is shown only when kWe is missing, without converting it. “Not listed” means the record lacks that rating, not zero output. Continuous and prime duties are kept separate. Check source documents, units and site conditions before comparing values.

An emissions classification in the catalog is not proof of certification for your engine or installation. Confirm the exact model, applicable documents and generator configuration.

Volvo Penta TAD1385VE: Review the model record and available supporting documents

Weichai WP13D385E200: Review the model record and available supporting documents

Choosing between Volvo Penta TAD1385VE and Weichai WP13D385E200

Use this comparison as an engineering shortlist, then confirm the complete generator package against load profile, voltage, 50/60 Hz frequency, duty class, emissions rules, cooling margin, altitude, ambient temperature, enclosure design, controller features, and alternator sizing.