Wandi WD129TAD23 vs Wandi WP1100
Compare Wandi WD129TAD23 and Wandi WP1100 by catalog output, operating duty, frequency and engine specifications. Start with the same duty and frequency, then check each model’s source and package conditions. These records alone do not establish interchangeability.
| Specification | Wandi WD129TAD23 | Wandi WP1100 |
|---|---|---|
| Standby electrical (50 Hz) | Not listed | Not listed |
| Prime electrical (50 Hz) | Not listed | Not listed |
| Standby electrical (60 Hz) | Not listed | Not listed |
| Prime electrical (60 Hz) | Not listed | Not listed |
| Other recorded mechanical power (duty unspecified) | 235 kW | 1,128 kW |
| Displacement | 12.9 L | Not listed |
| Configuration | L6 | Not listed |
| Cylinders | 6 | Not listed |
| Recorded engine speed | 1,500 RPM | 1,500 RPM |
| Fuel | Diesel | Diesel |
| Cooling | Not listed | Not listed |
| Recorded emissions classification | Not listed | Not listed |
| Dry weight | 1,350 kg | Not listed |
| Origin | China | China |
Compare matching ratings
Read across a row to compare the same operating duty and frequency. kWe is electrical output; mechanical kW is power at the engine shaft. kVA is apparent electrical power and is shown only when kWe is missing, without converting it. “Not listed” means the record lacks that rating, not zero output. Continuous and prime duties are kept separate. Check source documents, units and site conditions before comparing values.
An emissions classification in the catalog is not proof of certification for your engine or installation. Confirm the exact model, applicable documents and generator configuration.
Wandi WD129TAD23: Review the model record and available supporting documents
Wandi WP1100: Review the model record and available supporting documents
Choosing between Wandi WD129TAD23 and Wandi WP1100
Use this comparison as an engineering shortlist, then confirm the complete generator package against load profile, voltage, 50/60 Hz frequency, duty class, emissions rules, cooling margin, altitude, ambient temperature, enclosure design, controller features, and alternator sizing.