Source notes
Manufacturer: Wuxi Power Engineering Co., Ltd. (无锡动力工程股份有限公司), Wandi (万迪).
Official manufacturer product table, reviewed 2026-10-26.
Rated mechanical engine output 588 kW at 1500 rpm.
Published overload power 647 kW; this is not independently confirmed as ISO ESP.
Bore/stroke 138×160 mm.
Minimum specific fuel consumption 195 g/kWh; lubricating-oil consumption ≤0.67 g/kWh; exhaust temperature ≤650 C.
Source does not establish ISO PRP/ESP duty; frequency-specific prime/standby fields are unset.
No emissions certification is inferred from family marketing claims or model suffixes.
Active indicates currently listed by the manufacturer, not independent confirmation of production availability.
Source: wdpower.com · source
Official WD series datasheet, PDF p3, visually verified 2026-10-26: 12 cylinders, V layout; manufacturer net engine weight 2000 kg (converted from tonnes; no independent dry/wet qualification).
Total lubricating-oil capacity 50 L.
Total cooling-fluid capacity 155 L for the radiator-cooled configuration shown; not assumed engine-only coolant volume.
Maximum inlet resistance 6.2 kPa; maximum exhaust back pressure 6 kPa; maximum water outlet temperature 95 C; maximum oil temperature 100 C; thermostat range 72-84 C.
Electronic governing.
Unresolved specific-fuel-consumption difference: website lists 195 g/kWh, PDF lists 198 g/kWh.
Neither value supersedes the other pending manufacturer clarification.
Overall dimensions are withheld from structured engine-only fields pending confirmation of radiator/accessory scope; some published packing dimensions are smaller than overall dimensions.
Existing mechanical power is unchanged; source overload/standby labels do not establish ISO ESP or PRP.
Source: img01.71360.com · PDF


